TYAN Thunder n3600M (S2932 Manual page 75

3.11.1.2 ECC Configuration Sub-Menu
This menu allows the user to configure ECC setup for system & DRAM. Use
the up and down arrow ( / ) keys to select an item. Use the Plus and Minus
(+/-) keys to change the value of the selected option.
Main Advanced
ECC Configuration
ECC Mode
DRAM ECC Enable
DRAM SCRUB REDIRECT
4-Bit ECC Mode
DRAM BG Scrub
Data Cache BG Scrub
L2 Cache BG Scrub
L3 Cache BG Scrub
Feature
ECC Configuration
ECC Mode
DRAM ECC Enable
DRAM SCRUB
REDIRECT
4-Bit ECC Mode
BIOS Setup Utility
PCI/PnP Boot
[Good]
[Enabled]
[Enabled]
[Enabled]
[1.31ms]
[Disabled]
[Disabled]
[Disabled]
Option
Disabled
Select the level of ECC protection.
Basic
Note: The "Super" ECC mode
Good
dynamically sets the DRAM scrub
Super
rate so all of memory is scrubbed in
8 hours.
Max
User
DRAM ECC allows hardware to
Enabled
report and correct memory errors
automatically maintaining system
Disabled
integrity.
DRAM SCRUB REDIRECT allows
Disabled
the system to correct DRAM ECC
errors immediately when they occur,
Enabled
even if background scrubbing is on.
Enable 4-Bit ECC Mode.
Disabled
Note: Also known as CHIPKILL ECC
Mode
Enabled
75
Security Chipset
Select the level of
ECC protection. Note:
The "Super" ECC
mode dynamically sets
the DRAM scrub rate
so all of memory is
scrubbed in 8 hours.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Exit