TYAN Thunder n3600M (S2932 Manual page 21

J7/J42/J43/J59/J62: Front Fan Connectors
J7
Tach omete r
+1 2V
PW M
GND
Tachomet er
J42/J43
GND
+12V
Tachometer
PWM
J9/J55: CPU FAN Connector
Tach omete r
+1 2V
PW M
GND
Tachomet er
CPUFAN2
SATA 0/1/2/3/4/5: Serial ATA RAID Connectors
SAS 0/1/2/3/4/5/6/7 SAS Connectors
7
6
7
5
4
3
1
2
1
J59/J62
PWM GND
+ 12 V
GND
PWM
+ 12 V
CPUFAN1
SATA 0/1/2/3/4/5 Connectors
GND
- Connects to the Serial ATA drives via the Serial
ATA cable
RXP
- You may have the support of RAID 0, 1, 0+1,
and 5 through the onboard MCP55 Pro chip.
RXN
SAS 0/1/2/3/4/5/6/7 SAS Connectors
GND
- Connects to the Serial ATA or SAS HDD via the
Serial ATA cable
TXN
- You may have the support of NV RAID 0, 1 and
TXP
JBOD through the onboard LSI SAS1068E chip.
GND
Use these headers to connect the chassis
cooling fans to your motherboard to keep
the system stable and reliable.
J59: FAN1, J62: FAN2, J42: FAN3, J43:
FAN4
J7: FAN5
These connectors support the tachometer
monitoring and auto fan speed control.
Use this header to connect the processor
cooling fan to your motherboard to keep
the system stable and reliable.
J55: CPUFAN1, J9: CPUFAN2
This connector supports the tachometer
monitoring and auto fan speed control.
21