TYAN S8238 User Manual page 72

3.7.1.2 ECC Configuration
Main
ECC Configuration
ECC Mode
DRAM ECC Enable
DRAM SCRUB REDIRECT
DRAM BG Scrub
Data Cache BG Scrub
L2 Cache BG Scrub
L3 Cache BG Scrub
ECC Mode
Select the level of ECC protection. Note: The "Super" ECC mode dynamically sets
the DRAM scrub rate so all of memory is scrubbed in 8 hours.
Basic / Super / Disabled / Good / Max / User
DRAM ECC Enable
DRAM ECC allows hardware to report and correct memory errors automatically
maintaining system integrity.
Enabled / Disabled
DRAM SCRUB REDIRECT
DRAM SCRUB REDIRECT allows the system to correct DRAM ECC errors
immediately when they occur, even if background scrubbing is on.
Enabled / Disabled
DRAM BG Scrub
DRAM scrubbing corrects memory errors so later reads are correct. Doing this while
memory is not being used improves performance.
Note: When AMD's node interleave feature is enabled, BIOS will force DRAM scrub
off.
Disabled / 40ns / 80ns / 160ns / 320ns / 640ns / 1.28us / 2.56us / 5.12us /
10.2us / 20.5us / 41.0us / 81.9us / 163.8us / 327.7us / 655.4us / 1.31ms /
2.62ms / 5.24ms / 10.49ms / 20.97ms / 42.00ms / 84.00ms
Data Cache BG Scrub
Allow the L1 Data Cache RAM to be corrected while idle.
Advanced PCI/PnP
http://www.tyan.com
BIOS Setup Utility
Boot Security
[Good]
[Enabled]
[Enabled]
[1.31ms]
[Disabled]
[Disabled]
[Disabled]
72
Chipset Exit
Set the level of ECC
protection. Note: The
"super" ECC mode
dynamically sets the
DRAM scrub rate so all of
memory is scrubbed in 8
hours.
←
Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit