Installing The Processor And Heat Sink - TYAN S8238 User Manual

Table of Contents

2.4 Installing the Processor and Heat sink

The S8238 supported AMD

Specifications on page 3. Check our website at

processor support.

NOTE:

MiTAC is not liable for damage as a result of operating an

unsupported configuration.

Processor Installation (G34 1944-pin Socket for AMD CPU)

Follow the steps below to install the processors and heat sinks.

Please note that the illustrations are based on a G34 1944-pin Socket which may

not look exactly like the motherboard you purchased. Therefore, the illustrations

should be held for your reference only.

NOTE:

If only one processor is installed, start with CPU0 first.

Locate the CPU socket.

Pull the CPU lever slightly away from the socket and then push it to a fully

open position.

processors are listed in section Hardware

http://www.tyan.com

for latest

Table of Contents