Testing The Speaker Settings; Adjusting The Level; Completing The Settings - Sharp AQUOS BD-MPC41U Operation Manual

Before Starting Playback

Testing the speaker settings

Adjust the volume to 30 before testing the audio level.
(Page 41)
10
Press a/b/c/d to select "Test Start", then
press ENTER.
• A test tone is outputted from each speaker in the
following order.
L➝C➝R➝RS➝LS➝SW
0dB
10ft/0dB
SW
L
LS
8ft/0dB
Test Start
To select a speaker to be tested, press a/b/c/d to
•
select the speaker while the test tone is output.
• To stop the test tone, select "Test Tone Stop".

Adjusting the level

When the sound volume level of each speaker is
uneven, adjusting the level separately.
11
Press a/b/c/d to select the speaker with the
setting you want to adjust, then press ENTER.
• To select the speaker outputting the test tone, press
ENTER.
12
Press c/d to select "Level".
13
Press a/b to adjust the desired level, then
press ENTER.
14
Repeat from steps 11 to 13 for each speaker.
0dB
10ft/0dB
SW
L
LS
8ft/0dB

Completing the settings

15
Press a/b/c/d to select "Finish", then press
ENTER.
16
Press HOME or EXIT to exit.
40
10ft/0dB
C
10ft/0dB
R
RS
8ft/0dB
Finish Return
10ft/0dB
C
10ft/0dB
R
RS
8ft/0dB
Distance Level
Return
10ft 0dB