Install The Filters - Sharp Plasmacluster FP-P60CX Operation Manual

2

Install the filters

Place the True HEPA Filter
1
within the Filter Frame with
the tabs facing up.
Do not install the filter backwards or
the unit will not operate properly.
2
Place the Active Carbon Filter
on top of the True HEPA Fil-
ter with the bands (2 places)
facing up.
3 Place the Pre-filter through
the bands (2 places) located
at the corners of the Active
Carbon Filter.
Insert the tabs of the pre-filter into
the associated holes of the Filter
Frame.
4 Mount the Filter Frame to
the main unit.
5
Fix the Front Panel to the main
unit.
6 Fill in the usage start date
on the Date Label.
Use the date as a guide for the
Filter Replacement schedule.
Active Carbon Filter
True HEPA Filter
Date Label
E-11
HEPA Filter
Filter Frame
Band
Filter Frame
Band
Holes
Main unit
Filter Frame
Band
Tabs (4 places)