Sharp XL-DH259P Operation Manual page 6

Listening to the iPod or iPhone
iPhone and iPod operations
Made for:
iPhone 3GS
iPhone 3G
iPhone
rd
iPod touch (3 generation)
iPod touch (2 nd generation)
iPod touch (1 st generation)
iPod classic
iPod with video
th
iPod nano (5 generation)
iPod nano (4 th generation)
iPod nano (3 rd generation)
nd
iPod nano (2 generation)
st
iPod nano (1 generation)
iPod with colour display
iPod mini
Caution:
Please update your iPod unit to the latest software version
from Apple's homepage before using it.
Notes:
Once the iPod or iPhone is connected to the unit it will
begin charging.
The message "This accessory is not made to work with
iPhone" or similar, may appear on the iPhone screen
when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
This product is made for iPhone. To prevent
random interference when iPhone is docked, the
headphone output is disabled, and "HP INVALID"
will be displayed. You may also experience brief
audio interference during incoming calls.
iPod and iPhone adaptor connection
Notes:
Please use the adaptor supplied with your iPod or
iPhone unit.
You can use an audio cable to connect your iPod to the
AUDIO IN socket if:
1.
your iPod adaptor does not fi t into the iPod dock on
the main unit.
2.
you have an iPod that does not have an iPod
adaptor.
3.
you have an iPod that does not have an iPod 30 pin
connector.
iPhone iPhone
Adaptor No. Description
12 iPhone
15 iPhone 3G
15 iPhone 3GS
Capacity
4GB & 8GB & 16GB
8GB & 16GB
16GB & 32GB
E-5
To insert iPod or iPhone adaptor
1
Open the iPod cover by pulling up the tip.
2
Insert the iPod or iPhone adaptor into unit and
connect your iPod or iPhone.
iPhone (bottom)
Dock connector
iPhone adaptor
iPhone dock
iPhone connector
Caution:
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
To remove iPod or iPhone adaptor
Insert the tip of a screwdriver ("-" type, small)
into the adaptor hole as shown and lift upward
to remove.
iPod or iPhone playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod/iPhone button on the remote control
or FUNCTION button repeatedly on the main unit to
select iPod function.
3
Insert iPod or iPhone unit in iPod dock of main unit.
"DOCK OK" will be displayed for 3 seconds.
4
Press the (iPod/iPhone
playback.
iPhone playback
Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately
10 seconds.
Incoming calls will pause the playback and iPhone
ringtones will be heard from the main unit speakers
only.
Once the calls are answered, the conversation can
only be heard through the built-in iPhone speaker. Turn
on the iPhone speaker or undock the iPhone to start
conversation.
iPhone
) button to start