Table of Contents
Advertisement
Timer and sleep operation (Remote control only) (continued)
8
To select the timer playback source (CD, TUNER, USB,
iPod or AUDIO IN), press the
the MEMORY button.
When you select the tuner, select a station by pressing
the
or
button, and then press the MEMORY
button. If a station has not been programmed, "NO
PRESET" will be displayed and timer setting will be
cancelled.
9
Adjust the volume using the VOLUME control, and then
press the MEMORY button. Do not turn the volume up
too high.
10
Press the ON/STAND-BY button to enter the power
stand-by mode. The "TIMER" indicator lights up and
the unit is ready for timer playback.
11
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The " " indicator will blink during once
timer playback. The "DAILY" indicator will blink during
daily timer playback.
12
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It
will continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
Notes:
When performing timer playback using another unit
connected to the USB terminal or AUDIO IN socket,
select "USB" or "AUDIO IN" in step 8.
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not
turn on or off. To stop the timer playback, follow step
"Cancelling the timer setting" of this page.
Checking the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY
button.
3
Within 10 seconds, press the
"TIMER CALL", and press the MEMORY button.
Canceling the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY
button.
3
Within 10 seconds, press the
"TIMER OFF", and press the MEMORY button. Timer
will be canceled (the setting will not be canceled).
or
button. Press
or
button to select
or
button to select
or
button to select
or
button to select
E-12
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY
button.
3
Within 10 seconds, press the
"TIMER ON", and press the MEMORY button.
4
Press the ON/STAND-BY button to enter the power
stand-by mode.
Sleep operation
The radio, compact disc, iPod and USB can all be turned
off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 10 seconds, press the SLEEP button repeatedly
to select the time.
10
20
4
"SLEEP" will appear.
5
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation fi nishes.
To confi rm the remaining sleep time:
1
Whilst "SLEEP" is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
1
Whilst "SLEEP" is indicated, press the SLEEP button.
2
Within 10 seconds, press the SLEEP button repeatedly
to select "SLEEP 00".
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, pages 11 - 12).
Timer playback setting
Sleep timer setting
90 minutes
Sleep operation will
automatically stop
or
button to select
or
button to select
30
....... 80
90
End time
Desired time
Timer playback start
time
Advertisement
Table of Contents
