Four-Wheel Drive Operation - If Equipped - Jeep Compass Owner's Manual

• If a downshift would cause the engine to overspeed,
that shift will not occur until it is safe for the engine.
However. the CVT will stay in the manually selected
ratio.
• If the system detects powertrain overheating, the
transmission will revert to the automatic shift mode
and remain in that mode until the powertrain cools off.
• If the system detects a problem, it will disable the
AutoStick mode and the transmission will return to
the automatic mode until the problem is corrected.
FOUR-WHEEL DRIVE OPERATION — IF
EQUIPPED
This feature provides full time, on-demand, four–wheel
drive (4WD).
Four-Wheel Drive Switch
Where one or more wheels have wheel spin or if addi-
tional traction is needed in sand, deep snow, or loose
traction surfaces, activate the "4WD LOCK" switch by
pulling up once and releasing. This locks the center
coupling allowing more torque to be sent to the rear
wheels. The "4WD Indicator Light" will come on in the
STARTING AND OPERATING 287
5