Playing Back - Hitachi DZMV550E Instruction Manual

Playing Back

Before You Begin
PLAYING BACK
1
Press A button in the recording pause status.
The DVD video camera/recorder will enter the
playback mode, and the scene you have
recorded last will be played back. (For "scene",
see P. 103 and "Terminology", P. 158.)
When playback is finished, the DVD video
camera/recorder will enter the pause status at
the last image on disc.
If the playback pause status continues for as
long as 5 minutes, the DVD video camera/
recorder will automatically return to the
recording pause status.
2
Press the C button.
Playback will stop, and recording pause status
will be restored.
• Insert a disc or card recorded on this DVD video camera/recorder (P. 52,
53).
• Turn the DVD video camera/recorder on (P. 51).
Tilt up/down and to left/
right to select, and then
A
press to designate.
:
Note
•
If the LCD monitor is open during playback of movie,
playback sound will be heard from the speaker. Adjust
the sound volume using the volume control buttons (
R
).
•
To temporarily stop playback, press the
A
Press the button again to restart playback.
•
Even if you stop playback midway and immediately start
recording again, the new image will be recorded after the
last scene on disc or card (the previous images will not
be overwritten).
•
Image data edited on PC or certain types of image data
may not appear on this DVD video camera/recorder.
•
Image data recorded on another camcorder may not be
playable on this DVD video camera/recorder.
•
Depending on the amount of data to be played back, it
may take some time for the playback image to appear.
•
Do not operate the power switch or remove the card
while the ACCESS/PC or CARD ACCESS indicator is lit
or blinking: Doing so may damage the card or the data
on card.
123
S
A
button.
61
,