At&T 5Ess Custom Switch - 3Com ISDN Modem User Manual

A-6 A
PPENDIX
AT&T 5ESS Custom Switch
To order ISDN service for the AT&T 5ESS Custom switch,
photocopy and fax Table A-3 to the telephone company.
Table A-3 Line Configuration for AT&T 5ESS Custom
Required Information
Line Type
Line Code
Interface Type
Directory Numbers
Maximum Terminals
Maximum B Channels
Actual User
Circuit-Switched Voice
Circuit-Switched Voice Channel
Circuit-Switched Data
Circuit-Switched Data Channel
Terminal Type
Display
Circuit-Switched Voice Limit
Circuit-Switched Data Limit
Voice or Data
Call Appearance Preference
Flexible Call Offering (FCO)
Additional Call Offering (ACO)
Caller ID
Call Forwarding Variable
* The Directory Number, Circuit-Switched Voice, Maximum B Channels, and Circuit-Switched Voice
Limit parameters should be set to 2 to allow both analog ports to be used simultaneously. If those
parameters are set to 1, the ISDN line can only place or receive one call at a time.
† Flexible Calling (FCO) provides 3-Way Calling (Call Conference), Hold, Drop, and Transfer from
analog equipment attached to the modem. The 3C882 ISDN modem does not support FCO for use
with an AT&T 5ESS Custom Switch.
‡ Additional Call Offering (ACO) allows you to use incoming Dynamic Bandwidth Allocation (DBA) as
well as Call Waiting. The 3ComImpact IQ does not support ACO for use with an AT&T 5ESS Custom
Switch.
**Caller ID is necessary to employ the Call Logging feature. If you would like to have Call Logging,
you must order Caller ID. However, Caller ID itself, which requires an external device to monitor
incoming calls, is not supported.
††Call Forwarding allows you to forward calls to another telephone number.
A: O ISDN S
RDERING ERVICE
Specification
Standard (2B+D) ISDN line with point-to-point
configuration
2B1Q
U interface
2 *
1
*
2
Yes
*
2
Any
2
Any
A (Basic Terminal)
Yes
*
2
2
Both
Idle
†
No
‡
No
**
Yes
††
Yes