Dial-Up Networking For Windows - 3Com ISDN Modem User Manual

3-26 C
HAPTER
The Service Provider dialog box opens.
9 Enter the name of your ISP and click Next.
The Phone number dialog box opens.
10 Enter the area code, telephone number and (if necessary) the
country code of the location you are dialing.
11 Click Next.
The User Name and Password dialog box will open.
12 Enter your user name and password and click Next.
13 Configure as specified by your ISP and click Next.
14 Enter the IP address of your DNS server and click Next.
15 Choose the appropriate box to send and receive email
through the Internet. Then enter your email address (e.g.,
username@isp.com) and your Internet mail server address.
16 Click Next and Finish to exit the Internet Setup Wizard.
This completes the setup procedure for the Internet Setup
Wizard. Refer to Chapter 5, "Advanced Configuration," to
review the default settings and ensure that they reflect your
preferences. If you prefer not to change the default settings,
then go on to Chapter 7, "Placing and Receiving Calls".
Dial-up Networking for Windows NT 4.0
To configure Dial-Up Networking for Windows NT 4.0, follow
these instructions.
1 Click Start, Programs, Accessories, and Dial-Up-Networking.
Click New to create a new connection.
3: C
ONFIGURATION FOR AN
IBM-C PC R
OMPATIBLE
W
UNNING INDOWS