Table of Contents
Advertisement
Go To
From the Disc Navigation screen, you can jump to the first scene or last scene, and playback will
start from that point.
TOP (END)
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
Disc or Card Management
INITIALISING DISC OR CARD (FORMAT DISC. FORMAT CARD)
Initialising a DVD-RAM/DVD-RW/+RW disc or card will allow you to delete any recorded
contents. Before using a DVD-RW/+RW on this video camera/recorder, you must format it.
Before You Begin
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the
/
/
choose "Format Disc" or "Format Card" on
the "Disc" or "Card" menu screen, and then
press the
button.
The screen for verifying "Format Disc" or
"Format Card" will appear.
4
Choose "YES", and then press the
button.
When using DVD-RW, a screen for prompting
you to choose the VF or VR mode will appear.
Choose "NO" to cancel initialisation.
96
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder for initialisation. If the DVD video camera/recorder is turned off
during initialisation and the initialisation is interrupted, incorrect
initialisation will result and the incorrectly initialised disc will be
unusable.
• If you use a brand-new DVD-RW/+RW disc, message "Disc is not
formatted" will appear: Initialise the disc, following the subsequent
messages (p. 38).
/
/
buttons to
3
Use the
/
/
choose "Top" or "End" on the "Go To" menu
screen, and then press the
4
Press
to start playback.
:
Note
• If you wish to delete all recorded contents, it is
recommended that you use initialisation, which will
delete all the scenes in much less time than using the
scene delete function.
• Initialisation will delete all the recorded contents on
disc or card: Be careful not to delete data by mistake.
• It may not be possible to initialise a disc with many
scratches or dirt: Such a disc cannot be used (p. 10).
• This DVD video camera/recorder may not recognise
some discs or cards that have been initialised on PC
or a device other than this DVD video camera/
recorder.
• If you choose the VR mode when initialising a
finalised DVD-RW (VR-mode), the finalisation will not
be released. (The DVD-RW will be a finalised disc
without any recorded data, and recording will be
possible on it.)
Choosing the VF mode will release the finalisation of
the disc.
/
/
buttons to
button.
Advertisement
Table of Contents
