Setting Date And Time; Changing Display Format Of Date And Time - Hitachi DZ-MV4000E Instruction Manual

Setting Date and Time

Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
1
Press the MENU button, use the
/ buttons to choose "Date Setup" and
then "Date Set".
2
Press the button.
The figure for the day
will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
:
Note
After setting the figure for the day, press the
button to select the digit to be set. If you press the
button after selecting the figure for the day, the
screen for verifying the set date will appear instead
of screen for setting month, year or time.
3
Press the or
button to select the digit
you want to set in
sequence.

CHANGING DISPLAY FORMAT OF DATE AND TIME

You can select one of three date display formats: day/month/year, month/day/year or year/
month/day. Choose "Date Mode" on the "Date Setup" menu screen in procedure 1, and then set to
the desired date display mode.
:
Note
This DVD video camera/recorder incorporates a rechargeable battery to store the date and time in memory. If this
built-in battery is exhausted, the date and time will be reset. To prevent this, connect the AC adapter/charger to DVD
video camera/recorder every 6 months, and leave them for at least 24 hours with the DVD video camera/recorder
turned off: The built-in battery will be charged.
32
/ /
Da t e Se t u p
Da t e Se t 1 / 1 / 2 0 0 6
Da t e Mode 0: 0 0
ENTER RETURN
Da t e Se t u p
Da t e Se t 3 0 / 1 1 / 2 0 0 6
Da t e Mode 8 : 00
ENTER RETURN
Use / /
to select, and then press
designate.
Press the or
number for current date/time, and then
repeat step 3 to set the current date and time.
:
Note
To stop date/time setting midway, press the
button.
4
After setting the current
date and time, press the
button.
The screen for verifying
the set date will appear.
5
If the displayed date and time are correct,
press the button to choose "YES", and
then press the
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
Choosing "NO" will restore the menu screen.
/ buttons
to
button to select the
Da t e Se t
3 0 / 1 1 / 2 0 0 6 8 : 0 0
Da t e s e t u p?
YES NO
ENTER
button.