Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Perle RPS820
Summary of Contents for Perle RPS820
-
Page 1: Quick Start Guide
5500192-12 RPS Series Remote Power Switches Models Covered: RPS820 RPS830 RPS1620H RPS1630H Quick Start Guide... -
Page 2: Warnings And Cautions
Warnings and Cautions: Installation Instructions SECURE RACKING If Secure Racked units are installed in a closed or multi-unit rack assembly, they may require further evaluation by Certification Agencies. The following items must be considered. The ambient within the rack may be greater than room ambient. Installation should be such that the amount of air flow required for safe operation is not compromised. -
Page 3: You Need To Supply
Introduction This Quick Start Guide describes how to set up the Perle Remote Power Switch (RPS) with your IOLAN Device Server. If you are using the RPS as a stand- alone, see the RPS User’s Guide. You can securely manage the power going to any electronic device through the IOLAN Device Server. -
Page 4: Hardware Installation
RPS Series - Remote Power Switches; Quick Start Guide Hardware Installation This Quick Start Guide assumes that you have already powered up your IOLAN Device Server according to the Device Server's Quick Start Guide. 2.1. Applying Power to the RPS Refer to power rating nameplate on the RPS back panel, and then connect the RPS unit to an appropriate power source. -
Page 5: Connecting The Device Server To The Rps
RPS Series - Remote Power Switches; Quick Start Guide Connecting the Device Server to the RPS To securely manage the RPS, configure the Device Server as follows: Set the Line Service to Power Management for the line that is connected to the RPS serial port. -
Page 6: Technical Support
Details of the product warranty and registration process can be found by following the appropriate links on the Remote Power Switch Product page at: http://www.perle.com RPS Series Quick Start Guide Part No: 5500192-12 Copyright © Perle Systems Limited, 2011 Page 6... - Page 7 FCC Part 15 Regulation This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 8 13719-C...
Need help?
Do you have a question about the RPS820 and is the answer not in the manual?
Questions and answers