Hitachi DZMV380E Instruction Manual page 152

Message
Scenes over limit.
Cannot divide scene.
Scenes over limit.
Cannot move scene.
Stop processing
There was no scene
which can be deleted.
This card cannot be
used.
Please replace card.
This disc cannot be
used. Please replace
disc.
This disc is recorded by
the NTSC system.
Please replace disc.
Top scene cannot be
divided.
UNFORMAT DISC
Use AC adapter/
charger.
Use AC adapter/
charger.
Turn off power.
VIDEO scene cannot be
copied to card.
Write protected.
Check card.
Write protected.
Check disk.
152
Cause & Troubleshooting
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
This message will appear if you try to move a scene when the
number of scenes has already reached the registrable limit.
The button was pressed to stop processing of multiple scenes.
This message will appear if you try to delete multiple scenes on Disc
Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
The card cannot be used in this DVD video camera/recorder: Use
another card.
A disc that cannot be used on this DVD video camera/recorder has
been loaded. Check the type of disc.
This DVD video camera/recorder can use only discs recorded on
the PAL system. A disc recorded on the NTSC system cannot be
used on this DVD video camera/recorder.
Division is not possible at the start of scene.
The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD
video camera/recorder before using it.
Reinitializing even a disc used on this DVD video camera/recorder
may be necessary (initializing will erase all recorded contents on
disc). If this message appears, try to initialize the disc. If the same
message still appears, the disc may be damaged: Use another disc.
See *2 on page 153.
Finalization is not possible when the DVD video camera/recorder is
powered by a battery: Use the AC adapter/charger for finalization.
Scene cannot be repaired when the DVD video camera/recorder is
powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove the
disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
No movie can be copied to card.
Select stills and copy them to card.
•
A locked card or write-protected disc is inserted.
• Release the lock or write-protect using the Card or Disc
Navigation menu.
Reference
page
106, 115
104, 115
99, 108
26
24
106
125
75
41, 127
41
107
26, 124