Tether Anchors For The Child Restraint System - Chrysler Sebring Coupe Owner's Manual

6. If your child restraint system requires the use of a top
tether strap, refer to "Anchors for the child restraint
system" on page 85.
7. Before putting the child in the restraint, push and pull
the restraint in all directions to be sure it is firmly secure.
Do this before each use. If the child restraint system is not
firmly secure, repeat steps 1 through 6.
8. To remove a child restraint system and deactivate the
ALR mode, remove the child from the restraint. Unlatch
the buckle, remove the belt from the restraint and let the
belt fully retract.
SEATS, SEAT BELTS, CHILD RESTRAINTS AND AIR BAGS 85

Tether anchors for the child restraint system

In compliance with the Federal Motor Vehicle Safety
Standards, your vehicle has 3 attachment points on the
rear shelf, located behind the top of your rear seat. For
securing a child seat tether strap to each of the 3 rear
seating positions (2 outer and 1 center) in your vehicle.
3
G28B1090