Front Turn Signal And Parking/Standing Lights; Front And Rear Sidemarker Lights - Chrysler Crossfire Owner's Manual

CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.

Front Turn Signal and Parking/Standing Lights

• Twist the bulb socket counterclockwise and pull out.
Push the bulb into the socket, turn counterclockwise
and remove.
• Replace the bulb, push in and twist clockwise. Rein-
stall the socket, and turn clockwise.
MAINTAINING YOUR VEHICLE 307

Front and Rear Sidemarker Lights

1. Push the front sidemarker assembly in and slide it
forward. Push the rear sidemarker assembly in and slide
rearward. The assembly will release from the fascia.
2. Twist the bulb socket counterclockwise and pull out.
Push the bulb into the socket, turn counterclockwise and
remove.
3. Replace the light, push in and twist clockwise.
7