Standing Lights; Fog Lights (If Equipped) - Chrysler Crossfire Owner's Manual

2008
Hide thumbs Also See for Crossfire:
Table of Contents

Advertisement

98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
For nighttime driving, the exterior lights switch should
be in the low beam position to permit activation of the
high beam headlights.

Fog Lights (If Equipped)

To operate the fog lights, pull the headlight
switch out one stop, with the parking lights
and/or low beam headlights on. A light to the
lower left of the headlight switch will illumi-
nate when the fog lights are on.
To turn off the fog lights, push the headlight switch in
fully. Selecting high beam headlights will also turn off the
fog lights.

Standing Lights

When the vehicle is parked on the street, the standing
lights (left or right side parking lights) can be turned on,
making your vehicle more visible to passing vehicles.
To operate the standing lights, turn the headlight switch
counterclockwise one stop (right lamps) or two stops (left
lamps) from the OFF position. To turn off the standing
lights, return the headlight switch to the OFF position.
The standing lights cannot be operated when the ignition
switch is in the ON/RUN position.
CAUTION!
Standing lamps are intended for short term use when
parking. If these lights are left on for a long period of
time, your car's battery may drain, causing a possible
starting problem. Assure that the headlamp switch is
in the OFF position when leaving the vehicle.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 crossfire

Table of Contents