Enable/Disable The Rear Park Assist System - If Equipped; Service The Rear Park Assist System - Chrysler Pacifica Owner's Manual

NOTE:
• Ensure that the rear bumper is free of dirt and debris
to keep the system operating properly.
• Jackhammers, large trucks, and other vibrations could
affect the performance of the system.
If "Service Park Sense System" appears in the Electronic
Vehicle Information Center (EVIC) after making sure the
rear bumper is clean please see your authorized dealer.
Enable/Disable the Rear Park Assist System — If
Equipped
The Rear Park Assist System can be enabled and disabled
with a switch located on the switch bank of the instru-
ment panel. When the switch is pressed to disable the
system, the instrument cluster will display the PARK
ASSIST DISABLED message. Refer to "Electronic Vehicle
Information Center (EVIC)" in Section 4 of this manual.
When the shift lever is changed to R (Reverse) and the
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165
system is disabled, the instrument cluster will actuate a
single chime, once per ignition cycle, and it will display
the message.
The Rear Park Assist Switch LED will be ON when the
Rear Park Assist System is disabled or defective. The
Rear Park Assist Switch LED will be OFF when the
system is enabled.
The system can be turned on or off through the Electronic
Vehicle Information Center (EVIC), if equipped. For
details, refer to "Personal Settings (Customer Program-
mable Features)" under "Electronic Vehicle Information
enter (EVIC)" in Section 4 of this manual.

Service the Rear Park Assist System

When the Rear Park Assist System is defective, the
instrument cluster will actuate a single chime, once per
ignition cycle, and it will display the SERVICE PARK
ASSIST SYSTEM message. Refer to "Electronic Vehicle
Information Center (EVIC)" in Section 4 of this manual.
3