Table of Contents
Advertisement
MAC Config
Press
to display the MAC Config menu.
Enter
MAC0 LAN
MAC1 LAN
MACx LAN
Use these functions to set the MAC0 and/or MAC1 LANs to
disable their functions.
HD Audio
This function on the Integrated Peripherals menu allows you to enable or
disable the hard disk audio function.
IDE HDD Block Mode
Using this function on the Integrated Peripherals menu allows your IDE hard
drive needs to support block mode. Select
the optimal number of block read/writes per sector the drive can support.
Select
[Disabled]
Onboard FDC Controller
This function on the Integrated Peripherals menu allows you to enable or
disable the onboard FDC controller function.
Onboard Serial Port 1
This function on the Integrated Peripherals menu allows you to select the
onboard serial port 1 function. Options are
,
[3E8/IRQ4]
[Auto]
[Enabled]
[Disabled]
[Enabled]
if your drive does not support block mode.
[3F8/IRQ4]
, and
[Disabled].
Configuring the BIOS
or
Auto
to automatically detect
,
,
[2E8/IRQ3]
53
Advertisement
Table of Contents
