Status Leds; Smartnode Led Indicators; Rear Panel Expansion Port Leds - Patton electronics SMARTNODE 4900 User Manual

SmartNode 4900 User Manual

Status LEDs

The front panel LEDs display the status of the power, system, VoIP channels, Ethernet ports, and call load.
They are described in table
LED
Power Off
Solid green
Run Solid green
Blinking green
VoIP Off
Solid green
Blinking green
ETH 0/0 Solid green
Blinking green
ETH 0/1 Solid green
Blinking green
20% Call Load Green
40% Call Load Green
60% Call Load Green
80% Call Load Green
100% Call Load Green
LED
Status Solid yellow
Activity Flashing yellow Transmit or receive traffic is present on the serial interface
Status LEDs
10. Rear panel serial port LEDs are described in
Table 10. SmartNode LED Indicators
Indication
Indicates no power is applied.
Indicates power is applied.
Indicates normal operation.
Flashes once per second during boot (startup).
Indicates the unit is not configured or registered and has no active
VoIP connection.
Indicates the gateway is registered on a gatekeeper, media gateway
controller, associated to a remote unit, or has an active VoIP connection.
Indicates the unit is attempting or has failed to associate or register.
Ethernet port 0 is up
Indicates activity
Ethernet port 1 is up
Indicates activity
20% of the voice ports are active
40% of the voice ports are active
60% of the voice ports are active
80% of the voice ports are active
All of the voice ports are active
Table 11. Rear panel expansion port LEDs
Indication
Proper signals are present for modem communication
5 • LEDs status and monitoring
table 11.
Description
Description
47