Panasonic KX-TG2386 Operating Instructions Manual page 33

• To switch to the handset while using the base unit speakerphone:
— If the handset is off the base unit, press [C] or
[SP-PHONE] on the base unit.
— If the handset is on the base unit, just lift up the handset.
• If the Base Unit Talking Keypad is turned off (p. 21), the base unit will not
announce the entered number.
The base unit will not make announcements, when:
• the Base Unit Talking Keypad is turned off
• the Answering System is in use
• the handset is announcing.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
• Talk alternately with the other party in a quiet room.
• If you or the other party has difficulty hearing the conversation, press VOLUME
[<] to decrease the speaker volume.
To adjust the speaker volume during a conversation
To increase volume, press VOLUME [>].
To decrease volume, press VOLUME [<].
• There are 8 volume levels. If you try to increase/decrease volume when it is at the
maximum/minimum level, the base unit will beep 3 times.
To redial the last number dialed
Press [SP-PHONE], then press [REDIAL].
• "Redial" is announced.
• If the Base Unit Talking Keypad is turned off (p. 21), the base unit will not
announce.
To put a call on hold
Press [HOLD/CONF] during a conversation.
• The SP-PHONE indicator flashes.
To return to the call, press [SP-PHONE].
• The handset user can also take the call by pressing [C] or [s].
• If another phone is connected on the same line (p. 9), you can also take the call
by lifting its handset.
• If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4
additional minutes on hold, the call will be disconnected.
For assistance, please call: 1-800-211-PANA(7262)
Making Calls
[s]
on the handset, then press
33