Twin Needle - Euro-Pro INTELLI SEW 9136C Instruction Manual

T
03
52

TWIN NEEDLE

* The Twin needle accessory is optional. It is not
included with this machine.
Insert the twin needle.
Attention:
Use only the twin needle type included.
Use of any other twin needle type may
result in the needle being bent or damage to the
machine. Never use bent needles. Bent needles can
easily break, possibly result in injuries.
Follow the instructions for single-needle threading
using the horizontal spool pin. Thread through the
left needle. Set the second spool pin into the hole on
the top of the machine. Thread through all the
thread guide points, making certain to omit the
thread guide above the needle and pass thread
through the right needle.
Thread each needle separately.
Please Note:
Make sure that the two threads used to thread
the twin needle are of the same weight. You can
use one or two colors.
Before sewing adjust the stitch width, Turn the
handwheel to check the needle clearance, so that
needle does not hit the needle plate.
Select a stitch pattern and start to sewing.
The Direct Pattern 00 and the Patterns 07-17 cannot
be used. Sewing result will be a pattern with two
parallel stitch lines.
Please Note:
When sewing with twin needle, always proceed
slowly, and make sure to maintain a low speed to
insure quality stitching.