Warning Functions; Warning Animation Message Display; Instruction Animation Message Display; Warning Beeping Sound - Euro-Pro INTELLI SEW 9136C Instruction Manual

WARNING FUNCTIONS

BH lever is not lowered
The buttonhole or darning stitch was selected and press on
the foot control while the buttonhole lever is raised.

Instruction animation message display

Bobbin winding
The bobbin winder is winding the bobbin.

Warning beeping sound

- When operating correctly: 1 beep
- When the memory is full 30 units of pattern: 2-short beeps
- When operating incorrectly: 3-short beeps
- When the sewing machine is in trouble and can't sew : 8
seconds short beeps.
It means that the thread is twisted or jammed and the hand
wheel axle can't move. Please look through the "Trouble
shooting guide" on page 61/62 to find the solution. After the
problem has been solved, the machine will continue to sew.
If you press any button on the machine when the bobbin is full or
the bobbin winder is in the right position, then the machine will
beep 3 times as a warning. Return the bobbin winder stopper to
the left position.
Please Note:
If the problem is still not solved, please contact your local dealer.
Attention:
During the sewing, if the thread get jammed inside the hook
stopping the needle from moving and you continue pressing
the foot control, the security switch will stop the machine
completely. In order to restart the sewing machine, you will
have to turn the on/off switch to the OFF position and then
ON again.
04
57