Button Sewing - Euro-Pro INTELLI SEW 9136C Instruction Manual

a a
03
b
32

BUTTON SEWING

a
b
Change the presser foot to the button
sewing foot.
Move the drop feed control to "
the feed dogs.
Position the work under the foot. Place the
button in the desired position, lower the foot.
Select zig zag pattern. Adjust the stitch width
to "2.0-7.0" according to the distance between
the two holes of the button.
Turn the handwheel to check that the needle
goes cleanly into the left and right holes of
the button.
Before sewing, press the Auto-lock button to
sew reinforcement stitches automatically at
the beginning and at the end of the stitch.
If a shank is required, place a darning needle
on top of the button and sew.
For buttons with 4 holes, sew through the
front two holes first, push work forward
and then sew through the back two holes.
" to lower