Check Tire Pressure - Craftsman 917.293180 Owner's Manual

INSERT CABLE CLIP
• Insert plastic cable clip into hole on the
back of handle column. Push cable
into clip.
Handle Column
Cable Clip
CONNECT SHIFT ROD
• Insert end of shift rod farthest from
bend into hole of shift lever indicator.
• Insert hairpin clip through hole of shift
rod to secure with bend of clip on right
side.
[J-"_-Attach this End To shift "_'Shift Rod
Lever Indicator
REMOVE TILLER FROM CRATE
• Adjust handle assemby to lowest
position. Be sure hex bolt is tightened
securely.
• Make sure shift lever indicator is in "N"
(neutral) position.
• Tilt tiller forward by lifting handle.
Separate cardboard cover from levelin!
shield.
• Rotate tiller handle to the right and pull
tiller out of carton.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at
the factory for shipping purposes, Correc
and equal tire pressure is important for
best tilling performance.
• Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
• Handle height may be adjusted to
better suit operator. (See "TO ADJUST
HANDLE HEIGHT" in the Service and
Adjustments section of this manual).
Shift Rod Hairpin Clip Shift Lever
Indicator
7