Getting Started; Batteries; Ac Adaptor; About Rf Reception - Oregon Scientific RRM326P User Manual

GETTING STARTED

BATTERIES

Batteries are supplied with this product:
• 2 x UM-3 / AA 1.5V batteries
NOTE It is recommended that you use alkaline batteries
with this product for longer performance.
Insert batteries before first use, matching the polarity
(+ and -) as shown below. Press RESET after each
battery change.
NOTE Do not use rechargeable batteries with this
product.
BATTERY ICON MEANING
Batteries are low, or there are no
batteries installed and only the
adaptor is connected
RRM326P_EN_output 4

AC ADAPTOR

The batteries serve as a back-up power supply. For
continuous use of the projector, install the AC adaptor at
the base of the unit as shown below.
NOTE To help conserve energy, turn the PROJECTION
ON switch to OFF when you do not wish to use it.

ABOUT RF RECEPTION

This clock can automatically synchronize the date and
time with official time-keeping organizations in Frankfurt
(Germany) and Rugby (England). The unit can pick up a
Radio Frequency (RF) signal when it is within 1500km
(932 miles) of these locations.
4
03/09/2005, 14:44