The steam is very hot and can cause burns. The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to rest on the non combustible silicone any unit that has been tampered with or used for commercial purposes.
TROUBLSHOOTING Do not operate the steam generator with a damaged cord, plug or if the iron or any other part of the system has been dropped or damaged. To avoid the risk of electric shock, do not disassemble or attempt to repair the ironing system.
The steam power increases and initial condensation at maximum temperature is reduced. Make sure the temperature setting of the iron is within the steam range on the temperature selector. Turn power on for iron and steam generator. Before starting to use steam, make sure the Steam Ready Light is “ON”, indicating that steam is available.
4. To unscrew the boiler filler cap, push a professional type iron with steam down and turn counter clockwise holes placed in the front of the iron slowly. If any steam continues to soleplate. Correct ironing procedure escape, STOP and release the...
Page 6
NOTE: For best results, make sure that the steam generator is filled to the maximum level before every use. IRONING TEMPERATURE GUIDE Check garment labels for instructions i.e. do not iron chlorofiber FABRICS TEMPERATURE RANGE SYNTHETIC: Sheer Synthetic...
Need help?
Do you have a question about the STEAM GENERATOR IRON G6118 and is the answer not in the manual?
Questions and answers