* water in the reservoir. The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement use only. of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes.
Page 3
Move the variable steam control from ‘0’ to ‘Max’ a few times. • Iron may not be hot enough. Set thermostat to the Water droplets coming ‘Max’ position. Always allow iron sufficient time to...
Page 4
When turned on for the first time, your horizontal position and hit the burst of new iron may emit an odor for up to 10 steam button several times. The iron minutes. This is due to the initial...
Page 5
Clean” position to “0”. • Stand the iron upright and insert the plug 4. From time to time, clean the exterior into the wall socket to let the iron heat up again. • Move the iron over a clean cotton cloth to 5.
Page 6
The temperature indicator light will illuminate when the auto shut-off system has been reset. Allow time for the iron to re-heat. The temperature indicator light will go out when the iron is ready for use. Fig. 8 IRONING HINTS WARNING!
Need help?
Do you have a question about the GI465DH and is the answer not in the manual?
Questions and answers