EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. The liability of EURO-PRO Operating LLC is limited solely to the repair or replacement of the product at EURO-PRO Operating LLC’s option.
Page 3
Move the variable steam control from "0" to "Max" a few times. • Iron may not be hot enough. Set thermostat to the Water droplets coming "Max" position. Always allow iron sufficient time to...
Page 4
When turned on for the first time, your horizontal position and hit the burst of new iron may emit an odor for up to 10 steam button several times. The iron minutes. This is due to the initial...
Page 5
6. Set variable steam control to "0". 7. Allow iron to cool in an upright position before storing. 6. If the iron has not been used for a WARNING! Use caution when emptying the iron. Burns may occur from touching hot metal surfaces, hot water or steam.
Page 6
The red temperature ready light will illuminate when the auto shut-off system has been reset. Allow time for the iron to re-heat. The red temperature indicator light will go out when the iron is ready for use. Fig. 8 IRONING HINTS...
Need help?
Do you have a question about the GI485XH and is the answer not in the manual?
Questions and answers