FOR SAFE OPERATION
Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
An extension cord should not be used unless
necessary. Use of improper extension
cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
That pins on plug of extension cord are the same
number, size and shape as those of plug on charger.
That extension cord is properly wired and in good
electrical condition; and
That wire size is large enough for AC ampere rating
of charger as specified below:
Cord Length (Feet) 25'
Cord Size (AWG)
Note: AWG = American Wire Gage
DO NOT OPERATE CHARGER WITH A
DAMAGED CORD OR PLUG. If damaged, have
replaced immediately by a qualified
Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman.
Do not disassemble charger; take it to a qualilied
serviceman when service or repair is required.
Incorrect reassembly may result in a risk of electric
shock or fire.
To reduce risk of electric shock, unplug charger from
outlet before attempting any maintenance
cleaning. Turning off controls will not reduce this risk.
Do not use charger outdoors.
Disconnect charger from power supply when not in
KEEP BLADES CLEAN AND SHARP, Sharp blades
minimize stalling and kickback.
KEEP HANDS AWAY FROM CUTTING AREA.
Keep hands away from blade. Do not reach
underneath work while blade is moving. Do not
attempt to remove cut material when blade is
NEVER touch the blade or other moving parts during
NEVER bay a tool down before its moving parts have
come to a complete stop.
SAVE THESE INSTRUCTIONS.
Refer to them
frequently and use them to instruct others who may
use this tool. If you loan someone this tool, loan
them these instructions also.
SAVE THESE INSTRUCTIONS