General Safety Rules; Assembly; Operation - Craftsman 315.115690 Operator's Manual

d_lLWARNING:Donotallowfamiliarity withtoolsto
makeyoucareless. Remember thata careless
fractionofa second issufficient t o inflictserious
injury.
_ WARNING:Always wearsafetygoggles or safety
glasses withsideshields whenoperating tools.
Failure to doso couldresult i nobjectsbeingthrown
intoyoureyes,resulting inpossible serious injury.
APPLICATIONS
Youmayusethistoolforthefollowing purposes:
[] Sawing non-ferrous m etal, s heet s teel,wood,plastic,
andsimilar materials
[] Cutting woodsurfaces
[] Cutting thinsheet m etal
[] Cutting plastics andlaminates
ThisproductwillacceptDieHard_ 1 9.2Vlithium-ion bat-
terypacksandCraftsman 1 9.2Vnickel-cadmium battery
packs.
Forcomplete charging instructions, refer to the
Operator's
Manual for the battery packs and chargers listed in the
General Safety Rules.
TO INSTALL BATTERY PACK
See Figure 2.
[] Lock the switch trigger by placing the rotation selector
in the center position.
[] Place the battery pack on the tool.
[] Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured on the
tool before beginning operation.
CAUTION: When placing the battery pack in the
tool, be sure raised rib on battery pack aligns with
the groove in the tool and that the latches snap into
place properly. Improper assembly of the battery
pack can cause damage to internal components.
TO REMOVE BATTERY PACK
See Figure 2.
[] Lock the switch trigger by placing the rotation selector
in the center position.
[] Depress the latches on the side of battery pack.
[] Remove the battery pack from the tool.
_1_ WARNtNG: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
DEPRESS LATCHES TO
RELEASEBATTERYPACK
TO iNSTALL
TO REMOVE
BATTERY PACK
LATCHES
Fig. 2
10