GE JGS968 Owner's Manual page 15

ge.com (U.S.)
Using the clock, timer and control lockout, wvvw.GEAppliances.ca (Canada)
I¸
Make sure the clock is set to the
correct time of da_
ToSet the Clock
The clock must be set to tile correct time
of (la_ fin" tile automatic oxen tinting
flmctions to work properl). Tile time of
da) cannot be changed duYing a timed
baking or self=cleaning cycle.
[] Touch tile
CLOCK pad.
[] Touch tile number pads.
[] Touch the START pad.
The timer is a mflTutetimer onI,A
The timer does not control oven
operations. The maximum setting on
the timer is 9 hours and 59mflTutes.
ToSet the Timer
[]
[]
Touch tile
KITCHEN TIMER
ON/OFF pad.
Touch tile nmnber pads tmfil tile
_lIIlO/lnt of time yo/] want shows
in tile display: For example, to set
2 horns and 45 minutes, touch 2, 4
and 5 in that order: If you make a
mistake touch tile
KITCHENTIMER
ON/OFF pad and begin again.
[] Touch tile STARTpad.
After touching theSTART pad,SETdisappears,
this tellsyouthetl_ne is counting down, a lthough
thedisplay doesnot change untiloneminutehas
passedSeconds wi//notbe shownb thedisplay
untilthe/astmbute iscounting down.
[] _'_ hen tile timer reaches :00, tile
control will beep 3 times fbllowed
by one beep eve_ T 6 seconds tmtil
tile KITCHEN TIMERON/OFF
pad
is touched.
The 6-second tone can be cance/ed by following
thestepsb theSpecial f eatures of youroven
control s ectionunderTones a t theEndofa
Timed Cycle.
ToReset the Timer
If tile display is st.ill showing tile time
remaining, you may change it by
touching tile KITCHEN TIMER ON/OFF pad,
then touch the number pads tmtil the
time w)u want appea_ in tile displa>
If tile remaining time is not in tile display
(clock, delay
start or
cooking
time are in
the display), recall the remaining time by
touching tile KITCHEN TIMER
ON/OFF pad
and then touching tile number pads to
entei" tile
new tiI/le VO/I W;lIlt,
ToCancel the Timer
Touch tile KITCHEN TIMERON/OFF
pad twice.
LOCK/UNLOCK HOLD3 SECONDS
Control Lockout
Your c ontrolwill allowyoutolockout thetouch
padsso theycannotbeactivated whenpressed
To lock/tmhwk tile controls:
[] Touch tile 9 and
Opads at tile same
time fin 3 seconds, tmfil tile displa)
shmvs LOCON.
[] To unlock
tile control, touch tile 9
and 0pads at tile same time for 3
seconds, tin61 the display shows
LOC OFF.
When this teatm'e is on and tile touch
pads are touched, tile control will beep
and the display will show LOCON.
Thecontrollockout m odeaffectsall touch
pads.Notouchpadswi// workwhenthis
feature is activated
Theadjustment w iii be retalhedln memory
after a powerfailure.
15