Control Lock Pad - GE PP945 Owner's Manual

Cleaningthe glass cooktop, ge.com
CONTROL
LOCK
Control Lock Pad
As a convenience, you can lock the
entire cooktop at any time when it is
not in use or beti)re cleaning.
i,ocking the cooktop will prevent
surtace elements fl'om being turned
on accidentally.
Begin by locking the cooktop; see
the How to Lock the Cooktop section.
Use the same cleaning methods
as those described tOT the
glass-ceramic top.
Clean your cooktop after
each spill Use ceramic
cooktop cleaner.
Normal Daily Use Cleaning
ONLY use ceramic cooktop cleaner on
the glass cooktop. Other creams ma_ not
be as eflFctixe.
To maintain and protect the surface of
yore" glass cooktop, tollow these steps:
[] getore using the cooktop tOT
the fi_t time, clean it with ceramic
cooktop cleane_: This helps protect
the top and makes cleanup easier:
[] Daily use of ceramic cooktop
cleaner will help kee I) the cooktop
looking new.
[] Shake the cleanim,_ cream well.
Apply a few drops of ceramic
cooktop cleaner directly to the
cooktop.
[] Use a paper towel or cleaning pad
tOT ceramic cooktops to clean the
entire cooktop smti_ce.
[] Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very importantthat you DO NOT
heat the cooktop until it has been cleaned
thoroughlg
Usea cleaningpadfor ceramic
cooktops.
Burned-On Residue
WARNING: DAMAGE to yourglass surface
may occurif you usescrubpadsother thanthe
pad includedwith yourcooktop.
[] Allow the cooktop to cool.
[] Spread a few drops of ceramic
cooktop cleaner on the entire
burned residue area.
[]
Using the included cleanin,*_toad
fin" ceramic cooktops, Hfl) the
residue area, ali, ))lxing, I)ressure
as needed.
[] If any residue remains repeat the
steps listed aboxe as needed.
[] For additional protection, after all
residue has been remoxed, polish
the entire surtace with ceramic
cooktop cleaner and a paper towel.
The ceramic cooktop scraper
and all recommended suppfies are
available through our Parts Center.
See instructimTs under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
[] Allow the cooktop to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surfitce
and scrape the soil, It will be
necessary to apply pressm'e to
the razor scraper in order to
remove the residue.
[]
After scraping with the razor
scrape*, spread a few drops of
ceramic cooktop cleaner on tile
entire burned residue area. Use the
[]
cleaning pad to remove any
remaining residue.
For additional protection,
after all residue has been
removed, polish the entire
surthce with ceramic cooktop
cleaner and a paper towel.
13