Euro-Pro EP8001 STEAM GENERATOR IRON EP8001 Use And Care Instruction
Euro-Pro EP8001 STEAM GENERATOR IRON EP8001 Use And Care Instruction

Euro-Pro EP8001 STEAM GENERATOR IRON EP8001 Use And Care Instruction

Steam generator iron professional type ironing system for household use

Advertisement

EP8001
STEAM GENERATOR IRON
PROFESSIONAL TYPE IRONING SYSTEM FOR
HOUSEHOLD USE
USE AND CARE INSTRUCTION MANUAL
READ BEFORE USING THE IRONING SYSTEM
CONGRATULATIONS! YOU ARE THE OWNER OF THE ULTIMATE IN MODERN
IRONING AND PRESSING EQUIPMENT. FOR YOUR SAFETY AND TO FULLY ENJOY
THE ADVANTAGES OF YOUR APPLIANCE, PLEASE TAKE A FEW MINUTES TO
READ ALL THE IMPORTANT SAFEGUARDS AND "USE & CARE INSTRUCTIONS".
KEEP THIS MANUAL HANDY FOR EASY REFERENCE. PLEASE REVIEW THE
PRODUCT WARRANTY AND MAIL THE OWNER REGISTRATION FORM
EURO-PRO Operating LLC
EURO-PRO Operating LLC
94 MAIN MILL STREET, DOOR 16
4400 BOIS FRANC
PLATTSBURGH, NY 12901
ST. LAURENT, QUEBEC H4S 1A7
USA
CANADA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EP8001 STEAM GENERATOR IRON EP8001 and is the answer not in the manual?

Questions and answers

Nancy Lingemann
March 26, 2025

Do you know where I can get a replacement plastic funnel for filling my Euro-Pro steam iron? Mine has deteriorated and broken up over all the years. Thanks!

Summary of Contents for Euro-Pro EP8001 STEAM GENERATOR IRON EP8001

  • Page 1 READ ALL THE IMPORTANT SAFEGUARDS AND “USE & CARE INSTRUCTIONS”. KEEP THIS MANUAL HANDY FOR EASY REFERENCE. PLEASE REVIEW THE PRODUCT WARRANTY AND MAIL THE OWNER REGISTRATION FORM EURO-PRO Operating LLC EURO-PRO Operating LLC 94 MAIN MILL STREET, DOOR 16...
  • Page 2: Important Safeguards

    Use steam generator iron only for its intended use. Use ironing system only for its intended use. To protect against a risk of electric shock, do not immerse the iron or any part of the ironing system in water or any other liquids.
  • Page 3: Using Steam

    : Steam performance improves after the first 6-8 hours of usage. The steam power increases and initial condensation at maximum temperature is reduced. 1. Make sure the temperature setting of the iron is within the steam range on the temperature selector.
  • Page 4 MODEL EP8001 STEAM GENERATOR IRON 1. Safety/Filler Cap 2. Steam Ready Light (amber) 3. Steam ON/OFF Rocker Switch 4. Iron ON/OFF Rocker Switch 5. Water Tank/Steam Generator 6. Iron Rest 7. Steam Hose 8. Power Cord 9. Funnel A. Iron Heat Indicator Light B.
  • Page 5 4. FOR BEST RESULTS DO NOT LEAVE HOT IRON RESTING IDLE ON IRON REST (6) FOR LONG PERIODS OF TIME The life-span of your EP8001 will be reduced if the iron is left idle at high temperatures for extended periods. If iron is not in use, reduce its temperature to the lowest temperature setting on the Temperature Dial (B).
  • Page 6: Dry Ironing

    (8) and/or steam hose (7) is damaged. If the power cord (8) or steam hose (7) show signs of wear or damage, please return the unit to EURO-PRO Operating LLC (see warranty) for examination, repair or replacement.
  • Page 7 B. FILLING WATER TANK/STEAM GENERATOR (5) : 1. Make sure that both Iron ON/OFF Rocker Switch (4) and Steam ON/OFF Rocker Switch (3) are in the “OFF” position. 2. Make sure that your appliance is unplugged i.e. is not connected to an electrical power source.
  • Page 8: Temperature Settings

    Correct ironing procedure involves steaming the fabric with the front end of the iron followed by pressing and drying with heat from the rear of the iron. For best results, garments should be dry after pressing to avoid re-wrinkling due to lingering dampness.
  • Page 9: User Benefits

    C. DRY STEAM V.S. HUMID STEAM: Because steam is produced in a generator and not in the iron (as with regular household irons) you can select dry or humid steam. The temperature of the iron setting determines the type of steam.
  • Page 10: Storage/Cleaning And Maintenance

    Section A. Fill the tank with water as per instructions on Page 6. Plug in the unit. Switch on the system by pressing the Iron ON/OFF Rocker Switch (4) and the Steam ON/OFF Rocker Switch (3). DO NOT LEAVE UNIT UNATTENDED.
  • Page 11: Troubleshooting

    Do not operate the ironing system with a damaged cord, plug or if the iron or any other part of the system has been dropped or damaged. disassemble or attempt to repair the ironing system. Return the appliance to EURO-PRO Operating LLC (see Warranty) for examination and repair.
  • Page 12: Limited Warranty

    Proof of purchase date and $ 12.95 for handling and return packing/shipping charges must be included. The liability of EURO-PRO Operating LLC is limited solely to the cost of the replacement parts or the complete unit at our option. LABOUR CHARGES ARE NOT INCLUDED.

Table of Contents

Save PDF