Table of Contents
Advertisement
Quick Links
Shark Compact Performer
Model EP171
Use and Care Instructions
Congratulations!
You are the owner of the Shark Compact
Performer Iron. To fully enjoy the advantages of your appliance,
please take a few minutes to read all the "Use & Care Instructions"
and keep the instructions handy for easy reference. Please review
the product warranty and mail the owner registration form.
For information or assistance:
USA: EURO-PRO Operating LLC
21 Lawrence Paquette Industrial Drive
Champlain, NY 12919
Tel.: 1-866-98SHARK
www.sharkvac.com
Advertisement
Table of Contents
Related Manuals for Euro-Pro EP171
Summary of Contents for Euro-Pro EP171
- Page 1 Congratulations! You are the owner of the Shark Compact Performer Iron. To fully enjoy the advantages of your appliance, please take a few minutes to read all the “Use & Care Instructions” and keep the instructions handy for easy reference. Please review the product warranty and mail the owner registration form.
-
Page 2: One (1) Year Limited Warranty
$ 9.95 to cover the cost of return shipping and handling must be included. * The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. -
Page 3: Important Safeguards
8. Always disconnect iron from electrical outlet when filling iron with water or emptying and when not in use. 9. Do not operate iron with a damaged cord or if the iron has been dropped or damaged. 10. To avoid the risk of electrical shock, do not disassemble the iron. Return appliance to EURO-PRO Operating LLC for examination, repair or adjustment. -
Page 4: Troubleshooting
Move the steam control from ‘0’ to ‘Max’ a few times. • Iron may not be hot enough. Set thermostat to the Water droplets coming ‘Max’ position. Always allow iron sufficient time to from steam vents heat up (thermostat light goes off). -
Page 5: Ironing Chart
• When the thermostat light goes off to indicate that the iron has reached the selected temperature, set the steam control knob to the highest setting. • Keep the iron in a horizontal position and allow it to steam until the water runs out. -
Page 6: User Maintenance Instructions
Turn the temperature control dial to the desired temperature setting and allow the iron to heat for approximately 2 minutes before ironing. Place iron on its heel (on a stable, protected surface) while the iron is warming to desired temperature. The thermostat light will come on. When the iron has reached the desired temperature , the thermostat light will go “Off”. -
Page 7: Dry Ironing
1. Set the temperature control dial to the desired temperature. 2. Stand the iron on its heel and connect it to the main power supply. 3. The thermostat light will come on to indicate that the iron is heating up. -
Page 8: Ironing With Steam
7. Now turn the Spray/Burst of Steam button to the Steam setting and set the Steam Control Knob to the highest steam setting. 8. When the thermostat light has gone off, keep the iron in the vertical position and press the Steam/Spray button to produce a strong steam jet. See illustration below.
Need help?
Do you have a question about the EP171 and is the answer not in the manual?
Questions and answers