Light Bulb; Troubleshooting Tips - GE JRS06 Owner's Manual

Before you call for service...
Troubleshooting -tips
Save time and money] Review the charts on the following
pages first and you may not need to call for service.
ge.com
Controlsignals after
entering cookingtime
or delay start
Possible Causes
You forgot to enter a bake
temperature.
What To Do
• Touch tile BAKE pad and desired
teinperature.
Food does notbake Oven controls improperly set, • See tile Using the oven section.
or roast properly
Shelf position is incorrect
• See tile Using the oven section.
or the shelf is not level,
Incorrect cookware or • See tile Using the oven section.
cookware of improper size
being used,
Oven thermostat needs • See tile Adjust the oven thermostat--Do it yourself[
adjustment, section.
Food does not Oven controls improperly set, • Make st/l'e VOlt touch tile BROIL HI/LO pad.
broil properly
hnproper shelf posifon • See the Broiling Guide.
being used,
Food being cooked
• tlse the broiling pan and grid that Calue with wmr oven,
in a hot pan. Make sure it is cool.
Cookware not suited
• Llse the broiling
pan and grid that came with w>ur oven.
for broiling.
Alumhmm foil used ell the • See the Using the oven section.
broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power • Preheat the broil element for 10 minutes.
(voltage) may be low,
• Broil for the longest
period of time recommended in
the Broiling Guide.
Clock and timer A fuse in your home may be • Replace the fi/se or reset the circtfit breaker:
do not work blown or the circuit breaker
tripped.
Oven controls improperly set,
• See the Using the clock and timer section.
Oven light does Light bulb is loose or defective, • Tighten or replace tile btdb.
not work
Pad operating light is broken. • Call tot service.
75