Light Bulb; Probe - GE Monogram ZET757WD1WW Owner's Manual

Oven
NOTE: The glass cover (on some models) should be
light bulbs removed only when cold. Wearing latex gloves may
offer a better grip.
CAUTION
bulb, disconnect electrical power to the oven
at the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool
completely.
For your safety, do not touch a hot bulb with
bare hands or a damp cloth.
To remove:
1 Turn the glass cover counterclockwise
2 Using gloves or a dry cloth, remove the bulb
To replace:
1 Use a new 130-volt Halogen bulb, not to exceed
2 Using gloves or a dry cloth, remove the bulb
3 Push the bulb straight into the receptacle
4 Place the tabs of the glass cover into the grooves
For improved lighting inside the oven, clean the glass
cover frequently using a wet cloth. This should be done
when the oven is completely cool.
5 Reconnect electrical power to the oven.

Probe

The temperature probe may be cleaned with
soap and water or a soap-filled scouring pad.
Cool the temperature probe before cleaning.
Scour stubborn spots with a soap-filled scouring
pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
38
: Before replacing the
1/4 turn until the tabs of the glass cover
clear the grooves of the socket.
by pulling it straight out.
50 watts.
from its packaging. Do not touch the bulb with
bare fingers.
all the way.
of the socket. Turn the glass cover clockwise
1/4 turn.
Care and Cleaning
Wall Oven
Receptacle
Glass cover
Receptacle
Socket
Bulb
Tab
Use gloves
or cloth