GE JRS06 Owner's Manual page 11

ge.com
Tones at the End of a Timed Cycle
At theendofa tinned cycle,3 shortbeepswill
sound followed by one beep every 6 seconds until
the
CLEAR/OEE pad
is touched This continuous
6 second beep may be canceled
To cancel the 6 second beep:
[]
Touch the BAKEand BROIL HI/LO
pads at the sanle time fb_ 3 seconds
until the displa) shows SE
[]
Touch the BROILHI/LOpad.
The display shows CONBEEP
(confintlo/Is
beep). Touch the
BROIL
HI/LO
pad again. The display shows
BEEP. (This cancels the one beep
eveI_' 6 seconds.)
[] Touch the
START
pad.
I CLOCK
12 Hour,24 Hour or Clock Black-Out
Your c ontrol/sset to usea 12hourclock.
If you _x)uld prefer to have a 24 hour
militm T time clock or black-out the clock
display; fi)lh)w the steps below.
[] Touch the BAKE and
BROIL HI/LO
pads at the same time for 3 seconds
tmtil the display shows SF.
[]
Touch the
TIMER/CLOCK pad
once.
The displa) will show 12 hr. If this is
the choice you want touch the
START pad.
Touch the
TIMER/CLOCK
p ad
again
to
change to the 24 hour militm T time
dock. The display will show 24 hr. If this is
the choice you want touch the
START
pad.
Touch the TIMER/CLOCKpad again to
black-out the clock display. The display
will show OFF.If this is the choice you
want touch the START pad.
NOTE: If the clock is in the black-outmode you
will not be able to use the Delay Start function.
ii i!
Changing the Speed of the + or- Pads
As youusethe+ or- padswhensettinga t/me
or temperature, you may notice the d/splay
changes slow/g This special feature allows you
to change the speed Toset the speed you prefer,
follow thestepsbelow
[] Touch the BAKEand BROIL HI/LO
pads at the same time fl)r 3 seconds
tmtil the display shows SE
[] Touch the + pad. The displa)will
show )ou a set speed between 1
and 5.
] Touch the
+ pad to increase
the
speed
up to the nmnber
5.
Touch the - pad to decrease the
speed down to the ntm_ber 1.
[] Touch START to activate the setting
and leaxe the control set in this
special teatm'es mode.
11