Advertisement
Motor:
Power Source ...........................................
120V AC, 60 Hz, 15 Amp
Speed .......................................................
4200 RPM (No load)
Brake ........................................................
Electric
Double insulated .......................................
Yes
Motor Arbor Shaft Size ..............................
5/8 in.
Blade Size:
Diameter ....................................................
Arbor size .................................................
Rotating
Table:
Diameter ....................................................
Miter Detent Stops ....................................
Bevel Positive Stops .................................
Cutting Capacity:
12 in.
1 in. w/a 5/8 in. reducer
12-15/16 in.
0, 15, 22.5, 31.6, 45 ° Right & Left,
60 ° Right
0, 33.9, 45 ° Right & Left
Crosscut ...................................................
4 in. x 12-1/4 in.
Miter 45 ° Left ...........................................
4 in. x 8-3/4 in.
Miter 60 ° Right ...........................................
4 in. x 6-1/4 in.
Bevel 45 ° Left ............................................
2-3/16 in. x 12-1/4 in.
Bevel 45 ° Right ..........................................
1-9/16 in. x 12-1/4 in.
45 ° Miter and 45 ° Bevel Left .....................
2-3/16 in. x 8-3/4 in.
45 ° Miter and 45 ° Bevel Right ................... 1-9/16 in. x 8-3/4 in.
Crown Moulding Nested ............................
6-5/8 in.
Base Moulding Against Fence ................... 4-1/4 in.
i,i_ WARNING
i
To avoid electrical
hazards, fire hazards or damage to the tool, use proper
circuit protection. This tool is wired at the factory for 110-120 Volt operation.
It must be connected to a 110=120 Volt / 15 Ampere time delay fuse or circuit
breaker. To avoid shock or fire, replace power cord immediately
if it is worn,
cut or damaged
in any way. Before using your tool, it is critical that you read
and understand
these safety rules. Failure to follow these rules could result
in serious injury to you or damage to the tool.
Advertisement
