GE QuicksetcIII Owner's Manual page 27

Cleaning the glass cooktop, ton s ome mfde s)
i H/_l i.u , ,,n, i n
GEAppliancesocom
in,.i ,,,,u,i, i , i,i i
Clean your cool(top after
each spill° Use CERAMA
BRYTE_ Ceramic Cooktop
Cleaner_
Normal Dailg Use Cleaning
ON LV use CERAHA BRYTE ®Ceramic
Cooktop Cleaner on the
glass
cooktop
Other creams may not be as effective
To maintain and protect the surface of
your glasscooktop, follow these steps:
%
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE ® Ceramic Cooktop Cleaner.
This helps protect the top and makes
cleanup easier
[] Daily use ofCERAHA BRYTE ® Ceramic
Cooktop Cleaner will help keep the
cooktop looking new
@
[]
Shake the cleaning cream welt Apply
o few drops of CERAMABR'FTE _
Ceramic Cooktop Cleaner directly to
the cooktop,
Usea paper towel or CERAMA
BRYTE ' _CleaningPad for Ceramic
Cooktopsto clean the entire cooktop
surface
[] Use a dry cloth or paper towel
to remove all cleaning residue No
need to rinse
NOTE: It is very important that you DO
NOT heat the cooktop until it has been
cleaned thoroughlg
Usea CERAMA BRYT_ :_ Cleaning Padfor
CeramicCooktops
Burned-On Residue
NOTE:DAMAGEto your glass surface
may occur if you use scrub pads other
than those recommended
[Z] Allow the cooktop to cool
[_ Spread a few drops of CERAHA
BRYTE ® Ceramic Cooktop Cleaner on
the entire burned residue area
Using the included CERAtfABRYTE ®
CleaningPad for CeramicCool<tops,
rub the residue area, applying
pressure as needed
@
if any residue remains, repeat the
steps listed above as needed
For additional protection, after al!
residue has been removed polish
the entire surface with CERAHA
BRYTE ®CeramicCooktopCleaner
end a paper towel
]he CEBAMA BBYTE '_' C ezamic Ceektop
Scraper andall [ecommended s upplies
a_e availabteth[ough our ParisCenter
Seeinstructions
under"To Order P ans
sectionon nextpage
NOTE:Do not usea duIIor
nickedblade
Heavg, Burned-On Residue
Allow the cooktop to cool
Use a single-edge razor blade
scraper at approximatel_j a 45°
angle against the glass surface and
scrape the soil It will be necessary
to apply pressure to the razor
scraper in order to remove the
residue
After scraping with the razor
scraper, spread a few drops of
CEPAHA BRYTE ® Ceramic Cooktap
Cleaneron the entire burned residue
area, Use the CERAHABRYTE ®
Cleaning Pad to remove ang
remaining residue
For additional protection, after all
residue has been removed, polish
the entire surface with CERAHA
BRYTE ® Ceramic Cooktop Cleaner
and a paper towel
27