GE AJCS 06 LZ Owner's Manual page 12

I Mark the centerline of the stool. Measure
f_'om the centerline 13:_" on both sides ff)r the
panel cuts.
\ Stool
Sill
Centerline
'\/,// \, 4__.
'_L_
13%
2 Measure 12_ '' from the centerline on both
sides for the sill support brackets.
terline J_:_
,\ ,,, ,,/ \ '\
'_'_ 12_"
I Assemble the sill supports. Do not flflly tighten
the spacer mounting screws at this time.
Type B
Type E
Sill
Spacer mounting screws
Type (A)
)acer
Adjusting bolt
Large washer --
(For use with wood sills)
2 Befk_re attaching the sill supports, place them
on the window stool. Select the spacer posiuon
that will place the spacer near the outermost
point on the sill. Tighten the spacer mounung
screws.
Screws are in
position
Sill support
"V" notch
3 Turn the bolts and tighten the lock nuts to
make the sill supports level or flit down 1/8"
to the outside. Line up the "V" notch _._th
12:_" marks. Drill pilot holes and attach the
sill supports.
/2