GE DPVH880 Owner's Manual & Installation Instructions page 43

Installation Instructions
INSTALLINGTHE PEDESTAL(if desired)
AkCAUTION
- Due to the size end weight of
these products, end to reduce the risk of personal
injury or damage to the product, TWO PEOPLE ARE
REQUIRED FOR PROPER INSTALLATION.
KIT CONTENTS
[] 4 Support pads
[] 4 Mounting screws
[]Drawer divider
TOOLS YOU WILL NEED
[] Phillips head
screwdriver [] 7 mm Socket wrench
[]9/16" Open-endwrench
oradjustable wrench
INSTALLATION PREPARATION
Remove the packaging.
The drawer divider is taped at the top of the
shipping carton. Remove the divider and set aside
for final installation.
Flatten the product carton to use as a pad to lau
the washer or druer down on its side. Continue
using the carton to protect the finished floor in front
of the installation location.
[] REMOVE THE LEVELING LEGS
[] Carefullu lau the washer or druer on its side
to access the leveling legs on the bottom of
the appliance.
IMPORTANT: Do not log the washer or drger on
its hock! Do not remove the shipping bolts on the
back side of the washer. The bolts must remain in
place until the washer is returned to on upright
position.
[] Use an open-end wrench to remove the
washer or druer leveling legs.
Backout and remove
all 4 levelingbegs
@
43