GE DPVH880 Owner's Manual & Installation Instructions page 41

Installation Instructions
KIT CONTENTS
h
[]Right hand bracket
[] Left hand bracket
[] 4 rubber pads
[] 4 #12 x 1" screws
[] 4 #8 x I/2" screws
TOOLS YOU WILL NEED
[] Phillips screwdriver
[] Gloves
[] Open-endedwrench
[] Level
[] Pliers
INSTALLATION PREPARATION
Remove the packaging.
Flatten the product carton to use as a pad to lay
the dryer down on its side. Continue using the
carton to protect the finished floor in front of
the installation location.
INSTALLING THE STACK
BRACKETKIT
[] REMOVE THE DRYER LEVELING LEGS
A. Carefully lay the dryer on its side. Use the
packing material so you don't scratch the finish
on the dryer.
B. Use an open-end wrench or pliers to remove
the dryer leveling legs.
Backout andremove
all 4 levelinglegs
@
[] INSTALL RUBBER PADS
TO DRYER BASE
Locate the/4 rubber pads in the parts package.
Remove the adhesive backing and firmly place
over on the bracket where you removed the
leveling legs.
41