Dryoperation; Airflow Direction Adjustment - Frigidaire FRS12PYW10 Use & Care Manual

DRY operation
The dry mode will automatically
select the drying operation based on
the difference between the set
temperature and the actual room
temperature.
The temperature is regulated while
dehumidifying by repeating turning
on and off of the cooling operation
or fan only. The fan speed is mainly
LOW.
1. Press the MODE button to select
DRY.
2. Press the "+"/"1" button to set the
desired temperature from 61°F to
86°F.
3. Press the ON/OFF button, the
operation lamp lights and the air
conditioner starts to operate in the
DRY mode. FAN SPEED is Low.
Push the ON/OFF button again to
stop this unit operation.
Attention
Due to the difference between the set
temperature of the unit and the actual
indoor temperature, the Air Conditioner
in DRY mode will automatically switch
the operation modes between COOL
and FAN ONLY many times.
o o
Room T
Temperature_ t_,
t__ _ Time
Set temperature
DRY FUNCTION
Air flow direction adjustment
Use 3| button to adjust the airflow direction up and down.
When _1 button is pressed, the horizontal louver moves up and
down automatically. Press again to stop operation.
Attention
If the louver oscillates or moves in a position that could affect the cooling or
heating(only for models with heating function) of the air conditioner, the direction
of the oscillation!movement would alter automatically.