Frigidaire FRS12PYW10 Use & Care Manual page 33

_BLOW: When in cool or dry mode,
press "BLOW" button to active
or deactive blow function ,the
icon_owill display and the indoor
fan will continuety run for 10
minutes in order to dry the indoor
unit even though you have turned
off the unit.
TEMP:When pressing "TEMP"button,
there may be 3 optional icon display:
/_,/_, "_'; . But onty_is effective. The
display panel will indicate ambient
temperature for 5 seconds.
TURBO:Press this button to activate
/deactivatethe Turbo function which
enables the unit to reach the preset
temperature in the shortest time.
In cooling mode, the unit wilt blow
strong cooling air with super high
fan speed. In heating mode, the
unit wilt blow strong heating
air with super high fan speed.
SLEEP: Press this button to go into
the SLEEP operation mode. Press
it again to cancel. This function
only can be used in COOL, HEAT
(Only for models with heating
function) or DRY mode, and
maintain the most comfortable
temperature for you. To cancel SLEEP
program,press this button again.
1.ABOUT LOCK
Press "+" and "-" buttons simultaneously
to lock or unlock the keypad. If the
remote controller is locked, the icon
wilt be displayed on it, in that case,
press any button, the mark wilt j
flicker for three times. Repress the
combination to unlock.
2.About switch between Fahrenheit
and Centigrade
Under status of unit off, press "MODE"
and .... buttons simultaneously to switch
°C and °_'.
LIGHT:Turn the unit LED bight on or off
only.