Craftsman 172.171040 Owner's Manual page 8

Your 6.5 and 7.5-amp reciprocating saws have many built-in convenience
features for fast, efficient cutting. These features include a variable speed dial
that allows you to change the speeds for cutting a variety of materials. An
adjustable/pivoting shoe for maximum control in a variety of cuts and an
easy-to-grip rubber boot.
Rg. 1
_Variable
I tl -- .---TriggerSwitch
B,a o
_5_(_-_t_O e R_ubberBoot _Ha;dle
Input
Blade Stroke
BladeType
Rating
No-loadSpeeds
6.5 Amps or 7.5 Amps
11/8 in.
I/2 in. Universal Shank
120 volts, 60 Hz AC
0 to 2400 SPM
Before attempting to use any tool, be sure to familiarize yourself with all
the operating features and safety instructions.
Z_ WARNING:
IF ANY PARTS ARE MISSING, DO NOT OPERATE
THIS SAW UNTIL THE MISSING PARTS ARE REPLACED. FAILURE TO
DO SO COULD RESULT IN POSSIBLE SERIOUS PERSONAL INJURY,
Z_ CAUTION:
DO NOT let familiarity with your saw make you
careless. Remember that a careless fraction of a second is sufficient
to cause severe injury.
/_ CAUTION:
ALWAYS wear eye protection while operating this
power tool.
USING THE VARIABLE SPEED DIAL
Variable speed provides increased cutting versatility.
Simply rotate the dial from the slowest setting (1)
to the highest setting (6) depending upon the material being cut.
8
I
I