Spark Arrester Service; Air Cooling System - Craftsman 580.752420 Operator's Manual

7.0 gross horsepower 3000 psi 2.3 gpm pressure washer
Table of Contents

Advertisement

Available languages

Available languages

Spark
Attester
Service
Your engine is not factory-equipped with a spark arrester.
In some areas, it is illegal to operate an engine without a
spark arrester. Check local laws and regulations. A spark
arrester is available from your nearest Sears service
center. If you need to order a spark arrester, please call
1-800-4-MY-HOME (469-4663).
The spark arrester must be serviced every 50 hours to
keep it functioning as designed.
WARNING
DO NOT touch hot surfaces
and avoid hot exhaust
gases.
Allow
equipment
to cool before touching.
Keep
at least 5 ft. (152 cm) clearance
on all sides of
pressure
washer
including
overhead.
Code of Federal
Regulation
(CFR)
Title 36 Parks,
Forests,
and Public
Property
require
equipment
powered
by an internal
combustion
engine
to have a spark
arrester,
maintained
in effective
working
order,
complying
to USDA
Forest
service
standard
5100-1C
or later
revision.
In the State of California
a spark
arrester
is
required
under section
4442
of the California
Public
resources
code.
Other
states
may have similar
laws.
If the engine has been running, the muffler will be very
hot. Allow the muffler to cool before servicing the
spark arrester.
Remove spark arrester screen for cleaning and
inspection.
Replace if screen is damaged.
Air Cooling
System
Over time debris may accumulate in cylinder cooling
fins and cannot be observed without partial engine
disassembly.
For this reason, we recommend you
have a Sears or other qualified service dealer clean
the cooling system per recommended intervals (see
"Maintenance Schedule" on page 16). Equally
important is to keep top of engine free from debris.
See "Clean Debris".
2O

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents