How To Use Accessory Tray; How To Use Projectpro Nozzle System; Low Pressure; High Pressure - Craftsman 580.752420 Operator's Manual

How to Use
Accessory Tray
The unit is equipped with an accessory tray with
places to store your ProjectPro
TM
nozzles, spray gun
and nozzle extension. There is also a hook at the front
of the accessory tray to hold your high pressure hose.
NOTE: The extra hole in the tray is for storing a utility
brush. The extra clip in the tray is for storing a turbo
nozzle. The brush and turbo nozzle are NOT included
with your pressure washer. You can buy these items
as optional accessories.
1. Place nozzle extension through hole on accessory
tray, as shown.
Typical Pressure
Washer Shown
CAUTION
NEVER exchange ProjectPro
TM
nozzles without locking
the trigger lock on the trigger.
DO NOT twist ProjectPro
TM
nozzles while spraying.
Follow these instructions to change ProjectPro
TM
nozzles:
1. Engage trigger lock on spray gun.
2. Pull back collar on quick-connect and pull current
ProjectPro
TM
nozzle off. Store ProjectPro
TM
nozzles in holder provided on the accessory tray.
3. Select desired ProjectPro
TM
nozzle:
• For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats,
RV's, patio furniture, lawn equipment, etc.,
select yellow Delicate ProjectPro
TM
nozzle.
2. Place spray gun through hole on accessory tray
on right side of unit.
3. Insert multi-colored ProjectPro
TM
nozzles in
spaces provided in accessory tray.
4. Hang high pressure hose on hook attached to
accessory tray on front of tray as shown.
How to Use ProjectPro
TM
Nozzle System
The quick-connect on the nozzle extension allows you
to switch between four different ProjectPro
TM
system
nozzles. The ProjectPro
TM
nozzles vary the spray
pressure and pattern as shown.
Low
Pressure
Black
Use to apply
detergent
For general rinsing (medium pressure and
medium flow), ideal for most all purpose cleaning
such as home siding, brick patios, wood decks,
driveways and sidewalks, garage floors, etc.,
select orange General ProjectPro
TM
nozzle.
High Pressure
Delicate
40 ° Yellow
2350 PSI
2.7 GPM
General Max
15 ° Orange 0 ° Red
2675 PSI 3000 PSI
2.5 GPM 2.3 GPM
12